How to set up a VPN in 10 minutes for free (and why you urgently need one)

Create an incoming VPN connection in Windows

The most common way people get VPNs is through a monthly service. At the bottom of the window, enter a username and password for a user. You'll need dynamic DNS on your server and forward the openvpn port on your linksys to your server. Smarthome Office Security Linux. Have you considered using the free version of LogMeIn?

Why You Might Want to Do This

No one had hacked into any of her accounts, but attempts had been made to reset some of her passwords. For now, AceDeceiver has only been spotted in the wild in China, but it could spread. For this reason, you need to take extra precautions when you're on public or unfamiliar networks.

You can use a virtual private network VPN. This ensures that the data you send and receive is encrypted between your device and a server, ensuring that no one can sniff your traffic in a coffee shop, airport, or hotel. Most VPNs are subscription services, and cost from a few dollars to a few hundred dollars, depending on the speed and amount of data you use.

But there's a better way to set up a VPN: You can buy a router that includes built-in VPN software, and then set it up at your home or office. When you're on the road, you connect to that router, and the traffic between your laptop computer, iPhone, iPad or Android device is encrypted up to that point.

After that, it goes out onto the Internet, but from a location that you know is secure. And most routers also have firewalls you can activate to enhance their security. So far, so good? The first thing you need is a router with built-in VPN software. You certainly already have a router at home, and your employer does as well. In the United States, most ISPs provide modems that are simple pass-through devices, which don't offer routing services.

In this case, such as with a cable modem, you connect a router to the modem to then provide network access to your devices and Wi-Fi to your home. Here, the router serves two purposes. It allows you to connect to the internet — either via ADSL, cable, or fiber — and it provides a Wi-Fi network for your home. Most people have a router provided by their ISP; these routers are often simple, yet some may have more advanced features.

The main reason for this is that a router performs NAT, or network address translation. Don't try to work around this limitation; while you may be able to get it to work, it's very complex. Setting up one of these routers is quite simple; its software walks you through the setup.

If you are connecting to a cable modem, you just link the router with an ethernet cable. If you're using the device as an access point, you'll need to enter the credentials your ISP sent you to establish a connection. The router I've used for this article has a quick setup wizard, and you can be up an running in minutes. After that, to use the VPN, there are two things to set up.

You'll be setting up a VPN that's hosted on your router. Usually, an IP address — such as, say, 8. Go to the no-ip. Follow the instructions to choose a hostname; you can set up three different hostnames for free, but you only need one for the VPN. Note that you'll need to log into the no-ip website once every 30 days to keep your domain alive; you'll get an email once a month, and you just click a link to confirm it.

In the ASUS configuration screen, enter the hostname, your no-ip user name, and your password. Leave the rest of the settings as they are, and then click Apply.

Now it's time to set up the VPN, or the virtual private network. On the ASUS configuration, it's really simple. At the bottom of the window, enter a username and password for a user. You can register up to 16 different users. If not, clients will connect to the VPN, but their Internet traffic will still go out over the network they're on, unprotected.

To allow users to connect to the VPN, they need a certificate. Near the top of the window, click the Export button to save an.

Email this to each of the devices that you're going to use with the VPN do this at home, not on a public network ; you'll need to access the file on those devices. Note that you can set up a single user account for the VPN, or you can create different accounts for different devices. But you can only have one device connected to a user account at a time, so if you plan to use multiple devices simultaneously, you'll need to set up multiple accounts. Open the email you received with the. Enter the user name and password you set up on the router's configuration page, toggle the Save switch, and then toggle the button just below Disconnected.

You can easily test this by turning off your Wi-Fi, if you're connected to your home network. On the router's configuration page, you'll see the name of the user that is connected. To do this, download and install the latest stable version of Tunnelblick.

Tunnelblick installs a menu extra near the right of your menu bar. Click it and choose Connect Client. Enter the user name and password you set up on the router; you can check the box to have them saved in your keychain so it's quicker the next time you try.

You may have to manually enter the port numbers 47 and You specify the host PC by entering its local IP address. Therefore, before you setup the port forward, you should ensure the IP address won't change. Start by logging into to the Web-based control panel of the router.

Some routers don't have this feature. Once you have figured out the IP address, find the virtual server or port forwarding settings in the router's web-based control panel. Don't forget to save the changes! If your Internet connection uses a dynamic IP address, rather than a static one, you should signup and configure a dynamic DNS service. This is because when you configure the remote clients, you have to input the Internet IP address of where the host PC is located.

This will be a problem if the IP changes. However, you can sign up for a free service, such as from No-IP , and input your account details into the router so it will update the hostname with your IP.

Then you'll have a hostname such as yourname. Now everything on the server side should be configured and ready to go. Next you need to setup the clients. Now that you have the server setup, you need to configure the computers which you want to connect from, called the VPN clients. Here's how to in Windows Vista and Windows may by default assign the connection as a Public Network, limiting sharing functionality. Therefore you probably want to change this.

If you aren't prompted to do so, open the Network and Sharing Center and click Customize Windows Vista or the Public network link under the connection name Windows 7. Then on the popup window, select Work Network. This is great if they are using a public connection, like a port in a hotel or Wi-Fi hotspot, since it keeps their browsing private.

This Home VPN Router Setup Protects Your Traffic Wherever You Are

Leave a Reply